Use: mainly for wire, cable, PVC soft and hard tube, PU tube, nylon tube, heat shrinkable tube and other extruder extrusion material surface printing. The contents of the mark are trademarks, factory names, models, specifications, date of manufacture and their performance.

Working principle: using the frictional force between the extrusion material and the printing wheel, the printing wheel is rotated, so that the printing content on the surface of the printing wheel is printed on the printed object. Using motor to drive ink and scraping ink on both sides to ensure high speed printing ink will not splash.

Main technical parameters

1. The working height of the machine: 850mm - 1150mm

2. Suitable for printing wheel diameter: 100mm diameter

3. Applicable scope: printing 0.5mm Phi Phi 15mm

4. Printing: Phi 20 - 0.02 shaft diameter

5. Printing speed: less than 600m/min

6. The adjustment distance of the pressure wheel up and down: 20mm

7. The adjustment distance of the press wheel before and after: 20mm

8. Steering wheel up and down adjustment distance: 40mm

9. The adjustment distance of the steering wheel before and after: 40mm